user-group-case-sensitive enable

Function

The user-group-case-sensitive enable command enables the device to support case-sensitive user group names.

The undo user-group-case-sensitive enable command disables the device from supporting case-sensitive user group names.

By default, the device supports case-insensitive user group names and considers all upper-case characters as lower-case ones.

This command is supported only on the NetEngine 8000 F1A.

Format

user-group-case-sensitive enable

undo user-group-case-sensitive enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

To allow the NetEngine 8000 F to support case-sensitive user group names that some RADIUS servers deliver, run the user-group-case-sensitive enable command.

Configuration Impact

The undo user-group-case-sensitive enable command will be invalid if two user group names have the same characters but different cases or a user group name contains both upper and lower cases.

Precautions

This command is supported only on the admin VS.

Example

# Allow the device to support case-sensitive user group names.

<HUAWEI> system-view
[~HUAWEI] user-group-case-sensitive enable