user-qos

Function

The user-qos cir-zero command sets the CIR of user traffic when the CIR and PIR delivered by the RADIUS server are both 0s.

By default, the CIR is subject to the device specification when the CIR and PIR delivered by the RADIUS server are both 0s.

This command is supported only on the NetEngine 8000 F1A.

user-qos cir-zero { unlimited | cir-value }

Parameter	Description	Value
unlimited	Indicates that the CIR is subject to the device specification when the CIR and PIR delivered by the RADIUS server are both 0s.	-
cir-value	Specifies the CIR when the CIR and PIR delivered by the RADIUS server are both 0s.	The value is an integer ranging from 0 to 4294967295, in bit/s.

Parameter

Description

Value

unlimited

Indicates that the CIR is subject to the device specification when the CIR and PIR delivered by the RADIUS server are both 0s.

cir-value

Specifies the CIR when the CIR and PIR delivered by the RADIUS server are both 0s.

The value is an integer ranging from 0 to 4294967295, in bit/s.

AAA view

2: Configuration level

Task Name	Operations
aaa-access	write

Usage Scenario

This command is used to set the CIR for user traffic when the CIR and PIR delivered by the RADIUS server are both 0s.

When you run the user-qos cir-zero command several times, the latest configuration overrides the previous configurations.

NOTE:

This command can be used only when the CIR and PIR delivered by the RADIUS server are both 0s.

Precautions

In VS mode, this command is supported only by the admin VS.

# Set the CIR to 8000 bit/s when the CIR and PIR delivered by the RADIUS server are both 0s.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] user-qos cir-zero 8000