user accounting-together enable

Function

The user accounting-together enable command counts DAA service traffic into user traffic.

The undo user accounting-together enable command restores the default configuration.

By default, DAA service traffic is not counted into user traffic.

This command is supported only on the NetEngine 8000 F1A.

Format

user accounting-together enable

undo user accounting-together enable

Parameters

None

Views

Value-added service policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

If the traffic-separate enable command is run, service traffic is separated from user traffic. To facilitate network management, you can run the user accounting-together enable command to count DAA service traffic into user traffic.

Prerequisites

A DAA service policy template has been configured using value-added-service policy <service-policy-name> daa command.

Precautions

This command is supported only on the admin VS.

This command applies to a device on which the traffic-separate enable command is run.

Example

# Count DAA service traffic into user traffic in DAA service policy template named test.

<HUAWEI> system-view
[~HUAWEI] value-added-service policy test daa
[~HUAWEI-vas-policy-test] user accounting-together enable