user accounting dual-stack

Function

The user accounting dual-stack separate user-queue command configures separate traffic statistics for dual-stack DAA users based on user queues.

The undo user accounting dual-stack separate user-queue command restores the default configuration.

By default, separate traffic statistics are performed for dual-stack DAA users based on count IDs.

This command is supported only on the NetEngine 8000 F1A.

Format

user accounting dual-stack separate user-queue

undo user accounting dual-stack separate user-queue

Parameters

None

Views

Value-added service policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

When CAR rate limit is performed for DAA services and SQs are configured to limit user rates, statistics based on count IDs are not performed for traffic after CAR rate limit if the traffic-separate enable command is run to configure DAA service separation. In this situation, separate traffic statistics are performed for dual-stack DAA users. As a result, user service traffic cannot be counted into DAA service traffic. To perform separate traffic statistics for dual-stack DAA users based on user queues, run the user accounting dual-stack separate user-queue command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure separate traffic statistics for dual-stack DAA users based on user queues.

<HUAWEI> system-view
[~HUAWEI] value-added-service policy test daa
[*HUAWEI-vas-policy-test] commit
[~HUAWEI-vas-policy-test] user accounting dual-stack separate user-queue