isolate hub-ac hub-pw

Function

The isolate hub-ac hub-pw command enables isolation between AC interfaces and PWs in hub mode in a VSI.

The undo hub-ac hub-pw command disables isolation between AC interfaces and PWs in hub mode in a VSI.

By default, AC interfaces and PWs in hub mode in a VSI are not isolated.

Format

isolate hub-ac hub-pw

undo isolate hub-ac hub-pw

Parameters

None

Views

VSI-AUTO view, VSI-DEFAULT view, VSI-STATIC view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

If users with the same service are bound to the same VSI and the AC interfaces work in hub mode, to forbid the users from communicating, run the isolate hub-ac hub-pw command to isolate the AC interfaces from the PWs.

Prerequisites

The AC interfaces have been configured to work in hub mode.

Example

# Enable isolation between AC interfaces and PWs in hub mode in LDP VPLS.

<HUAWEI> system-view
[~HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi v100 static
[*HUAWEI-vsi-v100] pwsignal ldp
[*HUAWEI-vsi-v100-ldp] vsi-id 100
[*HUAWEI-vsi-v100-ldp] quit
[*HUAWEI-vsi-v100] isolate hub-ac hub-pw