The isolate spoken command enables forwarding isolation between AC interfaces, between UPE PWs, and between AC interfaces and UPE PWs in a VSI.
The undo isolate spoken command disables forwarding isolation.
By default, forwarding isolation between AC interfaces, between UPE PWs, and between AC interfaces and UPE PWs is disabled.
Usage Scenario
If users using the same services are bound to the same VSI, you can use the isolate spoken command to prevent the users from communicating with each other. When using the
isolate spoken command, note the following:Prerequisites
A signaling protocol has been configured for the VSI instance.
<HUAWEI> system-view [~HUAWEI] mpls [*HUAWEI-mpls] quit [*HUAWEI] mpls l2vpn [*HUAWEI-l2vpn] quit [*HUAWEI] vsi vsi100 [*HUAWEI-vsi-vsi100] pwsignal ldp [*HUAWEI-vsi-vsi100-ldp] vsi-id 2 [*HUAWEI-vsi-vsi100-ldp] quit [*HUAWEI-vsi-vsi100] isolate spoken include-multicast
<HUAWEI> system-view [~HUAWEI] mpls [*HUAWEI-mpls] quit [*HUAWEI] mpls l2vpn [*HUAWEI-l2vpn] quit [*HUAWEI] vsi company1 [*HUAWEI-vsi-company1] pwsignal ldp [*HUAWEI-vsi-company1-ldp] vsi-id 1 [*HUAWEI-vsi-company1-ldp] quit [*HUAWEI-vsi-company1] isolate spoken