web-auth-server packet

Function

The web-auth-server packet command sets the DSCP value for Portal packets sent by the device to a Portal server.

The undo web-auth-server packet command restores the default DSCP value for Portal packets sent by the device to a Portal server.

By default, the device is not enabled to listen for any Portal packets received from the web authentication server.

This command is supported only on the NetEngine 8000 F1A.

Format

web-auth-server packet dscp dscp-value

undo web-auth-server packet dscp dscp-value

Parameters

Parameter	Description	Value
dscp dscp-value	Specifies the DSCP value for Portal packet.	The value is an integer ranging from 0 to 63.

Parameter

Description

Value

dscp dscp-value

Specifies the DSCP value for Portal packet.

The value is an integer ranging from 0 to 63.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

The web-auth-server packet command can be used in increase the DSCP value for Portal packets sent by the device to a Portal server, preventing Portal packet loss caused by network congestion.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the DSCP value to 46 in Portal packets that the device sends to a Portal server.

<HUAWEI> system-view
[~HUAWEI] web-auth-server packet dscp 46