web-auth-server reply-message

Function

The web-auth-server reply-message command enables a device to transparently transmit response messages from the RADIUS server to the web authentication server.

The undo web-auth-server reply-message command disables a device from transparently transmitting response messages from the RADIUS server to the web authentication server.

By default, the response messages are transparently transmitted.

This command is supported only on the NetEngine 8000 F1A.

Format

web-auth-server reply-message

undo web-auth-server reply-message

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
portal	write

Usage Guidelines

Usage Scenario

To enable a device to transparently transmit response messages from the RADIUS server to the web authentication server, run the web-auth-server reply-message command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the device not to transparently transmit the response messages to the web authentication server.

<HUAWEI> system-view
[~HUAWEI] undo web-auth-server reply-message