mep mep-id eth-bn receive enable

Function

The mep mep-id eth-bn receive enable command enables the ETH-BN receiving function in an MA.

The undo mep mep-id eth-bn receive enable command disables the ETH-BN receiving function in an MA.

By default, the ETH-BN receiving function is disabled.

Format

mep mep-id mep-id eth-bn receive enable [ min-bandwidth min-bandwidth ]

undo mep mep-id mep-id eth-bn receive enable [ min-bandwidth min-bandwidth ]

Parameters

Parameter	Description	Value
mep-id mep-id	Specifies the ID of a MEP. A MEP ID identifies a MEP. The MEP ID must be unique in an MA.	The value is an integer ranging from 1 to 8191.
min-bandwidth min-bandwidth	Specifies the minimum bandwidth that can be advertised.	The value is an integer ranging from 1 to 4, in Mbit/s.

Parameter

Description

Value

mep-id mep-id

Specifies the ID of a MEP. A MEP ID identifies a MEP. The MEP ID must be unique in an MA.

The value is an integer ranging from 1 to 8191.

min-bandwidth min-bandwidth

Specifies the minimum bandwidth that can be advertised.

The value is an integer ranging from 1 to 4, in Mbit/s.

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

When routing devices connect to microwave devices, run the mep mep-id eth-bn receive enable command to enable the ETH-BN receiving function, implementing association with the microwave bandwidth.

Prerequisites

An MD, MA and MEP have been created using the cfm md, ma, and mep mep-id commands, respectively.

Example

# Enable the ETH-BN receiving function on MEP 1 in an MA named ma1 of an MD named md1.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet0/1/1
[~HUAWEI-GigabitEthernet0/1/1] portswitch
[*HUAWEI-GigabitEthernet0/1/1] quit
[*HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] map vlan 1
[*HUAWEI-md-md1-ma-ma1] mep mep-id 1 interface GigabitEthernet0/1/1 outward
[*HUAWEI-md-md1-ma-ma1] mep mep-id 1 eth-bn receive enable