Installing Cabinet Doors

  1. Installing the cabinet doors.

    Install the cabinet door after the inside components and cables. To install the components inside the cabinets and cables, see the Installation Guide.

    1. Align the door with the front face of the column.
    2. Place the door on the lower lintel and close the door till the lower pin automatically inserts into the hole in the lower lintel.
    3. Press the spring pin with your finger and push the upper part of the door till the spring pin properly inserts in the installation hole at the top of the lintel.
    4. Check the spring pin and lower pins and ensure that the door is properly installed.
    5. Follow the same steps to install the rear door.
      Figure 1 Installing the cabinet doors
  2. Installing the ground cables at the front doors and rear doors as shown in the figure.
    Figure 2 Installing the ground cables
Parent Topic: Installing the Cabinet on the ESD Floor
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic