Installing Network Cables

Before bundling network cables, use a network cable tester to test cable connectivity.

Bundle the network cables in a rectangle shape. Ensure that the cable ties are evenly spaced and face the same direction.
Route cables at a proper distance from each other. Otherwise, the installation of other cables may be affected.
Route Ethernet cables, power cables, and ground cables separately. The Ethernet cables must not be damaged or broken or have joints.

Attach temporary labels to both ends of each network cable.
Route network cables along the cable tray and plug them into corresponding interfaces.
Use a network cable tester to test the connectivity of network cables.
Use cable ties to bundle network cables at an interval of 150 mm and fasten the network cables to the rack.
Attach permanent labels 20 mm from both ends of each network cable.
Figure 1 Installing network cables