Installing a Shielded Ethernet Connector

Procedure

1. Hold the male and female connectors, with the male connector facing the female connector, as shown in Figure 1.
   Figure 1 Holding the male and female shielded connectors
   
2. Insert the male connector into the female connector, as shown in Figure 2.
   Figure 2 Feeding the male shielded connector into the female shielded connector
   
3. When you hear a click, the cable connector is completely inserted in the port. (The clip on the cable connector pops up to fix the connector in the port.) Pull the connector slightly and ensure that it is securely connected, as shown in Figure 3.
   Figure 3 Installed shielded Ethernet connector
   
4. To remove an Ethernet connector, press the locking key and pull out the connector, as shown in Figure 4.
   Figure 4 Removing a shielded Ethernet connector