Installing an Unshielded Ethernet Connector

Procedure

1. Hold the male and female connectors, with the male connector facing the female connector, as shown in Figure 1.
   Figure 1 Holding the male and female unshielded connectors
   
2. Feed the male connector into the female connector, as shown in Figure 2.
   Figure 2 Feeding the male connector into the female unshielded connector
   
3. A crisp click indicates that the connector is locked by the locking key. Pull the connector slightly and ensure that it is securely connected. Figure 3 shows an installed Ethernet connector.
   Figure 3 Installed unshielded Ethernet connector
   
4. To remove an Ethernet connector, press the locking key and pull out the connector, as shown in Figure 4.
   Figure 4 Removing an unshielded Ethernet connector