BRASAM/6/AMV6_LOG_ISOLATE_PREFIX_RESUME
Message
BRASAM/6/AMV6_LOG_ISOLATE_PREFIX_RESUME: The automatically locked IPv6 prefix was unlocked. (PrefixName=[PrefixName])
This log is supported only on NetEngine 8000 F1A.
In VS mode, this log is supported only by the admin VS.
Possible Causes
Cause 1: If no IPv6 address prefix is available in the domain, the IPv6 address prefix in the domain that is automatically locked is unlocked.
Cause 2: After the IPv6 address prefix auto-lock timer expires, the IPv6 address prefix is automatically unlocked.
Cause 3: In the diagnose view, run the clear auto-block ipv6-prefix command to manually unlock the IPv6 address prefix.
Procedure
Normal operation information, no need to deal with.