PM/4/EVT_PER_REP_CSES_NEW

Message

PM/4/EVT_PER_REP_CSES_NEW: The event happens at [StartTime], and lasts [Duration] seconds (InstanceTypeName=[InstanceTypeName], InstanceTypeId=[InstanceTypeId], InstanceName=[InstanceName], MeasureId=[MeasureId], MeasureName=[MeasureName]).

In VS mode, this log is supported only by the admin VS.

Description

CSES event information.

Parameters

Parameter Name	Parameter Meaning
StartTime	Event start time
Duration	Event duration
InstanceTypeName	Name of a statistical type
InstanceTypeId	ID of a statistical type
InstanceName	Name of a statistical instance
MeasureId	ID of a statistical indicator
MeasureName	Name of a statistical indicator

Possible Causes

The CSES count exceeded the preset threshold.

Procedure

1. Check whether link signals are of poor quality. Replace the fiber or clean the optical module. Check whether the event is cleared.

If the event is cleared, no action is required.
If the event is not cleared, go to Step 2.

2. Collect log information and configuration information, and then contact technical support personnel.