IFIT/2/IFIT_DYNFLOW_MIDEGRESS_REACH_LIMIT_active: The number of iFIT dynamic midegress flow reaches the upper limit. (UpperLimit=[UpperLimit])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
UpperLimit |
iFIT total dynamic flow transit node and egress number upper limit |
1. Use the NMS to check whether the number of dynamic flows on the intermediate and egress nodes of the iFIT reaches the upper limit. Delete redundant dynamic flows on the iFIT intermediate and egress nodes and check whether the alarm is cleared.
2. If the alarm persists, contact Huawei technical support.