IFIT/2/IFIT_DYNFLOW_MIDEGRESS_REACH_LIMIT_clear

Message

IFIT/2/IFIT_DYNFLOW_MIDEGRESS_REACH_LIMIT_clear: The number of iFIT dynamic midegress flow is below the upper limit. (UpperLimit=[UpperLimit])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name Parameter Meaning

UpperLimit

iFIT total dynamic flow transit node and egress number upper limit

Possible Causes

The iFIT total number of dynamic-hop flow has been lower than the upper limit.

Procedure

This alarm message is informational only, and no action is required.

Parent Topic: IFIT
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >