IFIT/2/IFIT_INGRESS_REACH_LIMIT_active

Message

IFIT/2/IFIT_INGRESS_REACH_LIMIT_active: The number of iFIT ingress flow reaches the upper limit. (UpperLimit=[UpperLimit])

In VS mode, this log is supported only by the admin VS.

Description

The number of iFIT ingress nodes on the device reached the upper limit.

Parameters

Parameter Name	Parameter Meaning
UpperLimit	Maximum number of iFIT ingress nodes on a device.

Possible Causes

The iFIT total number of ingress flow reaches the upper limit.

Procedure

1. Use the NMS to check whether the number of ingresses on the iFIT reaches the upper limit. Delete redundant iFIT head nodes and check whether the alarm is cleared.

2. If the alarm persists, contact Huawei technical support.