NTP/4/NTP_PEER_SELE

Message

NTP/4/NTP_PEER_SELE: The peer selected by the system is [source-address].

In VS mode, this log is supported only by the admin VS.

Description

The IP address of the source reference clock selected by the system is displayed.

Parameters

Parameter Name Parameter Meaning

source-address

Indicates the IP address of the source reference clock selected by the system.

Possible Causes

Cause 1: The system has just selected the source reference clock.

Cause 2: The switchover of source reference clocks is performed during clock synchronization.

Procedure

  • This log message indicates a normal situation, and no action is required.
Parent Topic: NTP
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >