L2VPN/3/OTHERCEIDSAME: When inserting RLB into VPN, found the same remote CE ID RLB already existed. (CeId=[CeId], Old Rlb: Pe=[Pe], Rd=[Rd]; New Rlb: Pe=[RmtPe], Rd=[RmtRd])
| Parameter Name | Parameter Meaning |
|---|---|
|
CeId |
ID of the local CE |
|
Pe |
PE IP address in the existing RLB |
|
Rd |
RD in the existing RLB |
|
RmtPe |
PE IP address in the new RLB |
|
RmtRd |
RD in the new RLB |
The RLB to be allocated to an MPLS L2VPN instance had the same remote CE ID as an existing RLB.
1. Run the ce command to configure a new CE ID. Then, check whether the alarm is cleared.
2. Collect log information and configuration information, and then contact technical support personnel.
3. End.