LSPM/6/RCV_SSP_MSG

Message

LSPM/6/RCV_SSP_MSG: Component [CompName] received message from SSP. (CompCid=[CompCid],MsgInfo=[MsgInfo])

Description

An MPLS component received a message from an SSP component.

Parameters

Parameter Name	Parameter Meaning
CompName	Name of the component that receives a message from an SSP component
CompCid	Component ID
MsgInfo	Message contents

Possible Causes

Cause 1: An MPLS component (master or slave component) was started.

Cause 2: A master/slave status switchover occurs on an MPLS component.

Cause 3: An MPLS component stopped operating due to a fault.

Cause 4: An MPLS component was stopped manually (for example, a component was shut down forcibly).

Procedure

1. This log is triggered by a key event such as component start, master/slave component switchover, or component operation stop. Check whether the key event occurs due to a manual operation.

If the key event occurs due to a manual operation, no action is required.
Collect log information and configuration information, and then contact technical support personnel.