NETCONFC/2/REMOTE_NETCONF_CONFIG_FAILED_clear: Successfully synchronized configurations to a peer device. (peerName=[peerName], addrType=[addrType], address=[address], featureName=[featureName])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
peerName |
Name of the remote end. |
|
addrType |
This object indicates the remote address type. |
|
address |
Remote IP address. |
|
featureName |
Module that fails to be started. |
The peer device is restored to process the configuration packet sent from the local device.
This log message is informational only, and no action is required.