NETCONFC/2/REMOTE_SYNC_CONFIG_FAILED_active

Message

NETCONFC/2/REMOTE_SYNC_CONFIG_FAILED_active: Failed to synchronize configurations to a peer device. (peerName=[peerName], addrType=[addrType], address=[address])

In VS mode, this log is supported only by the admin VS.

Description

Failed to verify the configuration with the remote device.

Parameters

Parameter Name	Parameter Meaning
peerName	Name of the remote end.
addrType	This object indicates the remote address type.
address	Remote IP address.

Possible Causes

Configurations fail to be synchronized from the local device to the peer device.

Procedure

1. View the NETCONF/6/NCA_OPER_RPC_REQ and NETCONF/6/NCA_OPER_RPC_RSP logs to locate the location where the configuration fails to be delivered and the cause.

2. Modify the configuration that fails to be delivered on the local end and deliver it again.

If the delivery is successful, no further action is required.
If the delivery fails, go to Step 3.

3. Collect log and configuration information, and contact technical support personnel.