SNMP/4/SNMP_MIB_SET_FAILED

Message

SNMP/4/SNMP_MIB_SET_FAILED: MIB node set failure. (UserName=[UserName], SourceIP=[SourceIP], DestIP=[DestIP], Version=[Version], RequestId=[RequestId], ErrorStatus=[ErrorStatus], ErrorIndex=[ErrorIndex], [OIDName], VPN=[VPN])

In VS mode, this log is supported only by the admin VS.

Description

The MIB object was set failed.

Parameters

Parameter Name	Parameter Meaning
UserName	Indicates the name of user.
SourceIP	Indicates the source IP address.
DestIP	Destination IP address.
Version	Indicates the version.
RequestId	Indicates the ID of a request.
ErrorStatus	Indicates error status, including: 0: noError 1: tooBig 2: noSuchName 3: badValue 4: readOnly 5: genError 6: noAccess 7: wrongType 8: wrongLength 9: wrongEncoding 10: wrongValue 11: noCreation 12: inconsistentValue 13: resourceUnavailable 14: commitFailed 15: undoFailed 16: authorizationError 17: notWritable 18: inconsistentName
ErrorIndex	Indicates the index of a variable that fails to be set. This log records all variables that need to be set by the NMS. For example, if the fifth variable fails to be set, the value of ErrorIndex is 5.
OIDName	Indicates OID and value of a node in a Set request. If the node is a password node, the value is displayed as ******. If a Set request contains many nodes and the information about these nodes cannot be completely displayed in one log, the information is displayed in multiple logs. If the length of a node's OID exceeds 512 bytes or the total length of a node's OID and value exceeds 1024 bytes, the last part is displayed as an ellipsis (...).
VPN	Indicates the name of a VPN instance.

Possible Causes

The information about the SET operation failed on an MIB object was recorded into the log.

Procedure

This log message is informational only, and no action is required.