SNMP/4/SNMP_RESET

Message

SNMP/4/SNMP_RESET: SNMP was switched to a new process.

In VS mode, this log is supported only by the admin VS.

Description

The SNMP process was restarted or a master/slave main control board switchover was performed on a device. The corresponding trap was sent to notify the NMS of SNMP entity restart, enabling the NMS to synchronize alarms from the device.

Parameters

None

Possible Causes

The SNMP process was restarted or a master/slave main control board switchover was performed on a device.

Procedure

This trap message is informational only, and no action is required.