DRIVER/1/TEMPOVERFATALRESUME

Message

DRIVER/1/TEMPOVERFATALRESUME: [BoardSlotID], i2c[i2c], address[address], channel[channel] temperature over fatal threshold resumed, temperature is [CurValue]C.

In VS mode, this log is supported only by the admin VS.

Description

The temperature became lower than the fatal upper threshold and the current temperature was provided.

Parameters

Parameter Name	Parameter Meaning
BoardSlotID	Slot ID of a board
i2c	I2C value
address	IP address
channel	Channel number
CurValue	Current temperature

Possible Causes

The temperature fell below the fatal upper threshold for more than 5 °C and the fault was rectified.

Procedure

This log message is informational only, and no action is required.