MPLS_LSPM/3/TUNNEL_APS_PATHMISMATCH_active

Message

MPLS_LSPM/3/TUNNEL_APS_PATHMISMATCH_active: Working or protection path mismatch are detected by APS frame. (IfIndex=[WorkTunnelIfIndex], SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId],WorkTunnel=[WorkTunnel], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

Description

The working or protection tunnels at both ends of an APS group are different.

Parameters

Parameter Name	Parameter Meaning
WorkTunnelIfIndex	Index of a primary tunnel interface
SessionTunnelId	Tunnel ID
LocalLspId	LSP ID
IngressLsrId	LSR ID of the ingress on an LSP
EgressLsrId	LSR ID of the egress on an LSP
WorkTunnel	Name of the working tunnel in a tunnel protection group
SgnlPrtcl	Signaling protocol used by a tunnel session: 1: RSVP 2: STATIC 3: CRSTATIC
SignalledTunnelName	Tunnel alias.
LsrRole	LSP role: 1: Ingress 2: Transit 3: Egress

Possible Causes

Cause1: The working or protection tunnels at both ends of an APS group are different.
Cause2: Physical links were incorrectly connected.

Procedure

Cause 1: The working or protection tunnels at both ends of an APS group are different.

Check that the working or protection tunnels at both ends of an APS group are the same.

Cause 2: Physical links were incorrectly connected.

Check that the optical fiber or cable between the local and remote devices is correctly connected.