MPLS_LSPM/3/TUNNEL_APS_PATHMISMATCH_clear

Message

MPLS_LSPM/3/TUNNEL_APS_PATHMISMATCH_clear: Working or protection path mismatch recovery are detected by APS frame. (IfIndex=[WorkTunnelIfIndex], SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId],WorkTunnel=[WorkTunnel], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

Parameters

Parameter Name	Parameter Meaning
WorkTunnelIfIndex	Index of a primary tunnel interface
SessionTunnelId	Tunnel ID
LocalLspId	LSP ID
IngressLsrId	LSR ID of the ingress on an LSP
EgressLsrId	LSR ID of the egress on an LSP
WorkTunnel	Name of the working tunnel in a tunnel protection group
SgnlPrtcl	Signaling protocol used by a tunnel session: 1: RSVP 2: STATIC 3: CRSTATIC
SignalledTunnelName	Tunnel alias.
LsrRole	LSP role: 1: Ingress 2: Transit 3: Egress

Possible Causes

The working or protection tunnels at both ends of an APS group became consistent.

Procedure

This trap message is informational only, and no action is required.