TWAMP/4/TWAMP_TWOWAY_JITTER_clear

Message

TWAMP/4/TWAMP_TWOWAY_JITTER_clear: The two-way jitter of the TWAMP test instance was under the lower threshold in three consecutive test intervals. (Test SessionId=[sessionId], Value=[Value], UpperLimitThreshold=[UpperLimitThreshold], LowerLimitThreshold=[LowerLimitThreshold], Sender IP=[sender-address], Reflector IP=[reflector-address], Sender Port=[sender-port], Reflector Port=[reflector-port], VPN Instance=[vpn-name])

Parameters

Parameter Name Parameter Meaning

sessionId

TWAMP Light test session ID.

Value

Jitter value

UpperLimitThreshold

The jitter trigger-alarm threshold value.

LowerLimitThreshold

The clear-alarm jitter threshold value.

sender-address

IP address of the sender.

reflector-address

IP address of the reflector.

sender-port

Port number of the sender.

reflector-port

Port number of the reflector.

vpn-name

Indicates the VPN instance name.

Possible Causes

The two-way jitter of a TWAMP test instance was below the threshold in three consecutive measurement periods.

Procedure

This trap message is informational only, and no action is required.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic