DRIVER/1/VOLBELOWFATALRESUME

Message

DRIVER/1/VOLBELOWFATALRESUME: [BoardSlotID], i2c[i2c], address[address], channel[channel] voltage below fatal threshold resumed, voltage is [CurValue]V.

In VS mode, this log is supported only by the admin VS.

Description

The voltage became higher than the fatal lower threshold and the current voltage was provided.

Parameters

Parameter Name	Parameter Meaning
BoardSlotID	ID of the slot where the board with the MonitorBus is inserted
i2c	I2C value
address	IP address
channel	Channel number
CurValue	Voltage

Possible Causes

The fault that the voltage was lower than the fatal lower threshold was rectified.

Procedure

This log message is informational only, and no action is required.