DRIVER/1/VOLOVERFATALFAIL

Message

DRIVER/1/VOLOVERFATALFAIL: [BoardSlotID], i2c[i2c], address[address], channel[channel] voltage over fatal threshold, voltage is [CurValue]V.

In VS mode, this log is supported only by the admin VS.

Description

The voltage exceeded the fatal upper threshold and the current voltage was provided.

Parameters

Parameter Name Parameter Meaning

BoardSlotID

ID of the slot where the board with the MonitorBus is inserted

i2c

I2C value

address

IP address

channel

Channel number

CurValue

Voltage

Possible Causes

The hardware of the power supply module was faulty.

Procedure

1. Run the display voltage slot command to check the current voltage of the board.

  • If the current voltage of the board is abnormal, go to Step 2.
  • If the current voltage of the board is normal, go to Step 3.

2. Collect the alarm information, log information, and configuration information, and contact technical support engineers.

3. End.

Parent Topic: DRIVER
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >