BRASAAA/4/hwAAAAccessUserResourceOrCpuAlarm_active
Message
BRASAAA/4/hwAAAAccessUserResourceOrCpuAlarm_active: The resource of users or cpu usage on the device reached the upper threshold. (Slot=[slotId],Cpu usage=[cpuUsage],User resource usage=[usrResUsage])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
slotId |
SlotId |
|
cpuUsage |
Cpu usage |
|
usrResUsage |
User resource usage |
Possible Causes
Cause 1: The user resource usage or CPU usage reached the upper limit when excessive users were online.
Cause 2: The specified upper limit was too small.
Procedure
1. Run the display this command in the system view to check whether the upper limit configured using the access-user exhaust threshold-alarm { main-resource-usage | slot-resource-usage | main-cpu-usage | slot-cpu-usage } upper-limit upper-limit lower-limit lower-limit command is too small.
- If the upper limit is too small, go to Step 2.
- If the upper limit is not too small, go to Step 3.
2.Run the access-user exhaust threshold-alarm command in the system view to reconfigure an alarm threshold for the user resource or CPU usage (upper-limit). Then check whether a clear alarm is generated.
- If a clear alarm is generated, go to Step 5.
- If no clear alarm is generated, go to Step 4.
3.Run the display access-user [ slot slot-id ] command in any view to check whether the value of the Total users field is close to the maximum number of users supported on the device.
- If the value is close to the maximum number of users supported on the device, add an interface board to the device.
- If the value is not close to the maximum number of users supported on the device, go to Step 4.
4.Collect alarm, log, and configuration information, and contact Huawei technical support personnel.
5.End.