LDT/4/hwAutoLoopDetectAlarm_clear

Message

LDT/4/hwAutoLoopDetectAlarm_clear: The interface turned to normal state. (Interface=[IfName])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name Parameter Meaning

IfName

Interface name.

Possible Causes

  • Cause 1:The fault triggering the alarm was rectified.
  • Cause 2:The loop is cancelled on this interface.

Procedure

This trap message is informational only, and no action is required.

Parent Topic: LDT
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >