FEI/4/hwBaseSecApplicationApperceiveDropRateRising_clear

Message

FEI/4/hwBaseSecApplicationApperceiveDropRateRising_clear: Security Application-apperceive drop packets alarm cleared. (ChassisID=[ChassisID], SlotID=[SlotID], Protocol=[Protocol], CurrentRateLow=[CurrentRateLow], CurrentRateHigh=[CurrentRateHigh], NotifyEnabled=[NotifyEnabled], RateThreshold=[RateThreshold], RateInterval=[RateInterval], ProtocolDescription=[ProtocolDescription], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
ChassisID	Indicates the chassis ID.
SlotID	Indicates the slot number.
Protocol	Indicates the protocol number of a discarded packet. The corresponding protocol numbers are as follows: ftpServer(1) sshServer(2) snmp(3) telnetServer(4) tftp(5) bgp(6) ldp(7) rsvp(8) ospf(9) rip(10) isis(11) sftpSever(12) icmp(13) msdp(14) pim(15) ipv4Arp(16) bpdu(17) dhcp(18) lacp(19) ntp(20) radius(21) hwTacacs(22) lspPing(23) igmp(24) rrpp(26) vrrp(27) bfd(28) mplsOam(29) eth8021ag(30) ftpClient(31) telnetClient(32) sshClient(33) sftpClient(34) dnsClient(35) telnetv6Server(64) telnetv6Client(65) icmpv6(67) pimv6(69) sshv6Server(70) ospfv3(71) bgpv6(72) ftpv6Client(73) ftpv6Server(74)
CurrentRateLow	Indicates the low 32 bits of traffic statistics.
CurrentRateHigh	Indicates the high 32 bits of traffic statistics.
NotifyEnabled	Indicates whether the trap function is enabled. 1: Enabled 2: Disabled
RateThreshold	Indicates the current alarm threshold.
RateInterval	Indicates the current alarm interval.
ProtocolDescription	Indicates the description of protocol.
Reason	Indicates the cause of the alarm.

Possible Causes

The number of discarded packets of protocols supported by board application layer association fell below the alarm threshold.

Procedure

1. This message is informational only, and no action is required.