DEVM/2/hwBrdTempFatalAlarm_clear

Message

DEVM/2/hwBrdTempFatalAlarm_clear: The board temperature was restored to a normal value. .(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName],EntityThresholdType=[EntityThresholdType], EntityThresholdCritical=[EntityThresholdCritical], EntityThresholdCurrent=[EntityThresholdCurrent], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalName	Indicates the name of the physical entity.
EntityThresholdType	The abnormal type for temperature: 1: hige. 2: low.
EntityThresholdCritical	The critical alarm threshold for critical alarm.
EntityThresholdCurrent	The current value that been measured.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Indicates the description of the cause of the trap.

Possible Causes

Cause 143872:The board temperature was restored to a normal value.
Cause 143873:The card temperature was restored to a normal value.
Cause 143874:The fan temperature was restored to a normal value.
Cause 143876:The power module temperature dropped to a normal level.

Procedure

This trap message is informational only, and no action is required.