NAT/4/hwCGNUserPortNumAlarm_clear
Message
NAT/4/hwCGNUserPortNumAlarm_clear: The number of ports assigned to CPEs is within the normal range. (Protocol=[Protocol], CPEIP=[CPEIP], InstanceType=[InstanceType], InstanceName=[InstanceName], AddrGroupName=[AddrGroupName], Threshold=[Threshold], Ports=[Ports], Slot=[Slot], Cpu=[Cpu], UserID=[UserID])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
Protocol |
Protocol type. The value is TOTAL. |
|
CPEIP |
CPE IP address. |
|
InstanceType |
Instance type. |
|
InstanceName |
Instance name. |
|
AddrGroupName |
Name of an IP address pool. |
|
Threshold |
Threshold of the proportion of CGN interfaces assigned to users to the total supported ones. |
|
Ports |
Number of used ports. |
|
Slot |
Slot ID of a service board. |
|
Cpu |
CPU ID of the service board. |
|
UserID |
User ID. |
Possible Causes
The proportion of CGN interfaces assigned to users to the total supported ones fell to 87.5%.
Procedure
This trap message is informational only, and no action is required.