DEVM/2/hwCommunicateError_active: The communication channel failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapEntType=[EntityTrapEntType], EntityTrapFaultID=140289, EntityCommunicateType=[EntityCommunicateType], Reason=The data channel of the board is abnormal)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
EntityPhysicalIndex |
The index for this entry. |
|
EntPhysicalIndex |
The index for this entry. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
EntityTrapEntType |
The type of this entity. |
|
EntityTrapFaultID |
To describe the fault id of trap. |
|
EntityCommunicateType |
The type of this commnuicate. The value can be: 1. Control channel:1. 2. monitor channel:2. 3. clock channel:3. 4. data channel:4. |
|
Reason |
Reason integer. |
1. Run the display device command in the user view to check the status of the faulty board.
2. Run the display interface command twice in the user view to check whether traffic is being transmitted on the interface of the faulty board.
3. If the alarm persists, collect information about alarms, logs, and configurations, and then contact Huawei technical support personnel.