L2VPN/4/hwEVPNNotSupportTunnelAlarm_active

Message

L2VPN/4/hwEVPNNotSupportTunnelAlarm_active: The public network tunnel of EVPN cannot forward traffic.(EvpnName=[hwNotSupportTunnelEvpnName], RemoteIp=[hwEVPNPeerRemoteIp], TunnelType=[hwNotSupportTunnelType])

In VS mode, this log is supported only by the admin VS.

Description

The public network tunnel of EVPN cannot forward traffic.

Parameters

Parameter Name	Parameter Meaning
hwNotSupportTunnelEvpnName	EVPN Name.
hwEVPNPeerRemoteIp	Remote IP.
hwNotSupportTunnelType	Tunnel Type.

Possible Causes

Cause 1: The EVPN is carried over a BGP over GRE tunnel, and the signaling protocol status of the EVPN is up.
Cause 2: The EVPN is carried over a BGP over LDP over GRE tunnel, and the signaling protocol status of the EVPN is up.
Cause 3: The EVPN is carried over a LDP over GRE tunnel, and the signaling protocol status of the EVPN is up.

Procedure

1.Change the public tunnel type configured for the EVPN service.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 2.

2.Collect trap, log, and configuration information, and contact technical support personnel.

3.End.