DEVM/2/hwEntityCheckFail_active-68173

Message

DEVM/2/hwEntityCheckFail_active: Physical entity is detected failed.(BaseTrapSeverity=16777216, BaseTrapProbableCause=68173, BaseTrapEventType=5, EntityPhysicalIndex=5, EntPhysicalContainedIn=3, EntPhysicalName=TSR_WHOLE frame <chassisID> , RelativeResource=NA, ReasonDescription=<chassisID> does not set fiber length.)

In VS mode, this log is supported only by the admin VS.

Description

Physical entity is detected failed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	indicates the severity level of the trap reported to the NMS.
BaseTrapProbableCause	Indicates the possible cause of the trap.
BaseTrapEventType	Indicates the trap type.
EntityPhysicalIndex	Physical index. The physical index varies with the chassis ID.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
RelativeResource	Indicates the name of the part related to the trap.
ReasonDescription	Indicates the description of the possible cause.

Possible Causes

The fiber length in 40G chassis is not set.

Procedure

1.Run the set fiber chassis chassis-id length fiber-length command to configure a correct optical fiber length, and check whether the trap is cleared.

If the trap is cleared, go to Step 3.
If the trap is not cleared, go to Step 2.

2. Collect the alarm information, log information, and configuration information, and contact technical support personnel.

3. End.