DEVM/2/hwEntityCheckFail_active-68174

Message

DEVM/2/hwEntityCheckFail_active: Physical entity is detected failed.(BaseTrapSeverity=1, BaseTrapProbableCause=68174, BaseTrapEventType=5, EntityPhysicalIndex=4294967295, EntPhysicalContainedIn=4294967295, EntPhysicalName=System, RelativeResource=NA, ReasonDescription=The number of tm resources exceeded 90% of the total tm resources.)

In VS mode, this log is supported only by the admin VS.

Description

Physical entity is detected failed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	indicates the severity level of the trap reported to the NMS.
BaseTrapProbableCause	Indicates the possible cause of the trap.
BaseTrapEventType	Indicates the trap type.
EntityPhysicalIndex	Physical index. The physical index varies with the chassis ID.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
RelativeResource	Indicates the name of the part related to the trap.
ReasonDescription	Indicates the description of the possible cause.

Possible Causes

The number of tm resources exceeded 90% of the total tm resources.

Procedure

1. Remove unnecessary interface boards or subcards and clear configuration to check whether the fault is rectified.

If the fault is rectified, go to Step 3.
If the fault is not rectified, go to Step 2.

2. Collect the alarm information, log information, and configuration information, and contact technical support personnel.

3. End.