DEVM/1/hwEntityInvalid_active: Physical entity failed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[67593], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=Cause1:A power module failed.A fault occurred on the power module. Cause2:Internal communication failed for a power module. Communication between the power module and main processing unit in the same chassis failed.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BaseTrapSeverity |
To describe the level of trap. |
|
ProbableCause |
To describe the probable cause of trap. |
|
BaseTrapEventType |
To describe the type of trap. |
|
EntityPhysicalIndex |
The index of the physical entity. |
|
EntContainedIn |
The value of entPhysicalIndex for the physical entity. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
RelativeResource |
This object may contain a key word to indicate the relative resource of an entity. |
|
ReasonDescription |
To describe the reason of trap in DisplayString style. |
Cause1:A power module failed.A fault occurred on the power module.
Cause2:Internal communication failed for a power module. Communication between the power module and main processing unit in the same chassis failed.
1. Check whether the power module is connected properly and the power switch is off. If so, switch on the power. Check whether the input of the power module is normal. If not, install the power module properly. Then, check whether the alarm is cleared after the external input is complete.
2. Check whether the power module is inserted completely. Then, check whether the alarm is cleared after the power module is removed and inserted again.
3. Replace the power module and check whether the alarm is cleared.
4. Collect trap, log, and configuration information, and contact technical support.
5. End.