DEVM/1/hwEntityInvalid_active-67596

Message

DEVM/1/hwEntityInvalid_active: Physical entity failed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=67596, BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=<slotid>%s is failed, LCD is absent.)

In VS mode, this log is supported only by the admin VS.

Description

Physical entity failed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	To describe the level of trap.
ProbableCause	To describe the probable cause of trap.
BaseTrapEventType	To describe the type of trap.
EntityPhysicalIndex	The index of the physical entity.
EntContainedIn	The value of entPhysicalIndex for the physical entity.
EntPhysicalName	The textual name of the physical entity.
RelativeResource	This object may contain a key word to indicate the relative resource of an entity.
ReasonDescription	To describe the reason of trap in DisplayString style.

Possible Causes

slotid%s is failed, LCD is absent.

Procedure

1. Check whether the LCD is removed or the cables are not connected well.

If so, go to step 2.
If not, go to step 3.

2. If the LCD is installed, open the LCD. Remove the cables connecting the serial interfaces and re-connect the cables. Then, check whether the trap is cleared.

If so, go to Step 5.
If not, go to Step 3.

3. Replace the LCD and check whether the trap is cleared.

If so, go to Step 5.
If not, go to Step 4.

4. Collect trap, log, and configuration information, and contact technical support.

5. End.