DEVM/1/hwEntityInvalid_active: Physical entity failed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[67796], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=Cause1: PCI BUS: indicates errors related to the PCI BUS. Cause2: Clock check: indicates errors related to the logic clock. Cause3: Tcam BUS: indicates errors related to the TCAM BUS. Cause4: Tcam ID: indicates errors related to the ASE TCAM ID. Cause5: Tcam array parity: indicates errors related to the Tcam array entry. Cause6: Ddr Parity: indicates errors related to the Ddr entry. Cause7: LA-1 Parity: indicates parity errors of the QDR interface.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BaseTrapSeverity |
To describe the level of trap. |
|
ProbableCause |
To describe the probable cause of trap. |
|
BaseTrapEventType |
To describe the type of trap. |
|
EntityPhysicalIndex |
The index of the physical entity. |
|
EntContainedIn |
The value of entPhysicalIndex for the physical entity. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
RelativeResource |
This object may contain a key word to indicate the relative resource of an entity. |
|
ReasonDescription |
To describe the reason of trap in DisplayString style. |
Cause1: PCI BUS: indicates errors related to the PCI BUS.
Cause2: Clock check: indicates errors related to the logic clock.
Cause3: Tcam BUS: indicates errors related to the TCAM BUS.
Cause4: Tcam ID: indicates errors related to the ASE TCAM ID.
Cause5: Tcam array parity: indicates errors related to the Tcam array entry.
Cause6: Ddr Parity: indicates errors related to the Ddr entry.
Cause7: LA-1 Parity: indicates parity errors of the QDR interface.
1. Replace the board. After the new board is registered, check whether the alarm is cleared.
2. Collect trap, log, and configuration information, and contact technical support.
3. End.