DEVM/1/hwEntityInvalid_active: Physical entity failed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[67848], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=The channel between ICUs became faulty.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BaseTrapSeverity |
To describe the level of trap. |
|
ProbableCause |
To describe the probable cause of trap. |
|
BaseTrapEventType |
To describe the type of trap. |
|
EntityPhysicalIndex |
The index of the physical entity. |
|
EntContainedIn |
The value of entPhysicalIndex for the physical entity which 'contains' this physical entity. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
RelativeResource |
This object may contain a key word to indicate the relative resource of an entity. |
|
ReasonDescription |
To describe the reason of trap in DisplayString style. |
1. View the EntPhysicalName field in alarm information. Check whether the ICUs are connected through an inter-chassis cable. If no, connect the cable and check whether the alarm is cleared. If the alarm persists, perform step 3. If the boards are connected, perform step 2.
2. Check whether the cables are correctly connected and the LEDs at the two ends blink. If the LEDs do not blink, replace the cables and optical module or optical/electrical module (if any). Then check whether the alarm is cleared. If the alarm persists, perform step 3.
3. Replace the board and check whether the alarm is cleared. If the alarm persists, go to step 4.
4. Collect log files and contact Huawei technical support personnel.