DEVM/1/hwEntityInvalid_active: Physical entity failed. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[67851], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalContainedIn=[EntContainedIn], EntPhysicalName=[EntPhysicalName], RelativeResource=[RelativeResource], ReasonDescription=A loop is formed between ICU(s), either because two connections are established between ICUs or two ports of the same ICU are interconnected.)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
BaseTrapSeverity |
To describe the level of trap. |
|
ProbableCause |
To describe the probable cause of trap. |
|
BaseTrapEventType |
To describe the type of trap. |
|
EntityPhysicalIndex |
The index of the physical entity. |
|
EntContainedIn |
The value of entPhysicalIndex for the physical entity which 'contains' this physical entity. |
|
EntPhysicalName |
The textual name of the physical entity. |
|
RelativeResource |
This object may contain a key word to indicate the relative resource of an entity. |
|
ReasonDescription |
To describe the reason of trap in DisplayString style. |
A loop is formed between ICU(s), either because two connections are established between ICUs or two ports of the same ICU are interconnected.
1. View the EntPhysicalName field in alarm information. Check which two interfaces form a ring.
2. Remove the cables of the corresponding interfaces. Note that the alarm generated when the device is started with a ring will not be cleared after the ring is broken. You must run a command to clear the alarm or restart the device.
3. Connect the cables as specified.