DEVM/1/hwEntityRemove_active-65539

Message

DEVM/1/hwEntityRemove_active: Physical entity is removed. (BaseTrapSeverity=4, BaseTrapProbableCause=65539, BaseTrapEventType=5, EntityPhysicalIndex=[ULONG], EntPhysicalContainedIn=[ULONG], EntPhysicalName=Card slot <slotID>,Reason=PIC Card is Removed.)

In VS mode, this log is supported only by the admin VS.

Description

Physical entity is removed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the severity level of the trap reported to the NMS.
BaseTrapProbableCause	Indicates the possible cause of the trap.
BaseTrapEventType	Indicates the trap type.
EntityPhysicalIndex	Indicates the physical index.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
Reason	Reason.

Possible Causes

Card is removed.

Procedure

1.Check whether the subcard needs to be inserted into the board.

If the subcard needs to be inserted into the board, go to Step 2.
If the subcard does not need to be inserted into the board, go to Step 4.

2.Insert the subcard into the corresponding slot on the LPU. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 3.

3.Collect the trap information, log information, and configuration information, and contact technical support personnel.

4.End.