DEVM/1/hwEntityRemove_active-65541

Message

DEVM/1/hwEntityRemove_active: Physical entity is removed.(BaseTrapSeverity=4, BaseTrapProbableCause=65541, BaseTrapEventType=5, EntityPhysicalIndex=[ULONG], EntPhysicalContainedIn=[ULONG], EntPhysicalName=[STRING], Reason=The optical module's state is changed.)

In VS mode, this log is supported only by the admin VS.

Description

Physical entity is removed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the severity level of the trap reported to the NMS.
BaseTrapProbableCause	Indicates the possible cause of the trap.
BaseTrapEventType	Indicates the trap type.
EntityPhysicalIndex	Indicates the physical index.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
Reason	Reason.

Possible Causes

The optical module was removed from an interface of the subcard.

Procedure

1. Determine whether the optical module needs to be installed in the interface.

If the optical module needs to be installed in the interface, go to Step 2.
If the optical module does not need to be installed in the interface, go to Step 4.

2. Install the optical module in the interface. Check whether the trap is cleared.

If the trap is cleared, go to Step 4.
If the fault persists, go to Step 3.

3. Collect the trap information, log information, and configuration of the router, and contact technical support personnel.

4. End.