DEVM/1/hwEntityReset_active-66561

Message

DEVM/1/hwEntityReset_active: Physical entity reset. (EntityPhysicalIndex=[ULONG],BaseTrapSeverity=4, BaseTrapProbableCause=66561, BaseTrapEventType=5, EntPhysicalContainedIn=[ULONG], EntPhysicalName=[STRING], RelativeResource=[STRING], ReasonDescription=Because of heart beat loss,the entity of MPU <slotID> is resetting, not ready)

In VS mode, this log is supported only by the admin VS.

Description

The physical entity reset because a part failed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the physical index.
BaseTrapProbableCause	Possible reason.
BaseTrapEventType	Indicates the possible cause of the trap.
EntityPhysicalIndex	Indicates the trap type.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
RelativeResource	This object may contain a key word to indicate the relative resource of an entity.
ReasonDescription	To describe the reason of trap in DisplayString style.

Possible Causes

Cause 1: A fault may occur on the ECM channel.

Cause 2: The CPU usage on the master MPU is too high.

Procedure

1. The slave MPU can restore automatically. Check whether the reset MPU works normally.

If so, go to Step 3.
If not, go to Step 2.

2. Replace an MPU. After the registration, check whether the trap is recovered.

If so, go to Step 4.
If not, go to Step 3.

3. Collect the trap information, log information, and configuration of the router, and contact technical support personnel.

4. End.