DEVM/1/hwEntityReset_active-66590

Message

DEVM/1/hwEntityReset_active: Physical entity reset. (EntityPhysicalIndex=[ULONG],BaseTrapSeverity=4, BaseTrapProbableCause=66590, BaseTrapEventType=5, EntityPhysicalIndex=[ULONG], EntPhysicalContainedIn=[ULONG], EntPhysicalName=[STRING], RelativeResource=[STRING], ReasonDescription=Because of user operation or software exception, the entity has been resetted, now it is ready)

In VS mode, this log is supported only by the admin VS.

Description

The physical entity reset because a part failed.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the physical index.
BaseTrapProbableCause	Possible reason.
BaseTrapEventType	Indicates the possible cause of the trap.
EntityPhysicalIndex	Indicates the trap type.
EntPhysicalContainedIn	Indicates the parent index.
EntPhysicalName	Indicates the name of the entity such as a chassis.
RelativeResource	This object may contain a key word to indicate the relative resource of an entity.
ReasonDescription	To describe the reason of trap in DisplayString style.

Possible Causes

Cause 1: A board reset command was run.

Cause 2: Software faults occurred.

Procedure

1.Check whether the board registers after a reset.

If so, go to Step 4.
If not, go to Step 2.

2. Replace the board and then check whether the alarm is cleared after the board registers.

If so, go to Step 4.
If not, go to Step 3.

3. Collect trap, log, and configuration information, and contact technical support personnel.

4. End.