DEVM/1/hwFanInvalid_active-139264

Message

DEVM/1/hwFanInvalid_active: The fan module failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=139264, Reason=The fan module of the fan is abnormal.)

In VS mode, this log is supported only by the admin VS.

Description

The fan function is disabled.

Parameters

Parameter Name	Parameter Meaning
EntityPhysicalIndex	The index for this entry.
EntPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

Possible Causes

The fan module of the fan is abnormal.

Procedure

1.Check whether the fan module is properly installed:

If the fan module is not properly installed, install it properly.
If the fan is properly installed, check whether the fan is blocked.
If the fan module is blocked, remove the blocker.
If not, replace the fan module.

2. Collect the information about alarms, logs, and configurations, and then contact technical support personnel.

3. End.